Unit: 1 unit = 1 entry set (2 handles)
Timber species : Cedar
Size: 180mm
Door type: Entry & Glass doors
Fitting type: Back to back set (one handle for both the front and rear sides of the door)
Fitting hardware supplied: 10mm pre-fixed threaded inserts, threaded rod
Finish: Raw ready for sealing, painting or staining
Door Handle | ROUND cedar (set)
Compatible Handle Styles This fixing method is suitable for any back-to-back round handle set, providing a secure and aesthetically pleasing finish.
Hardware Supplied:
-
1 x Threaded rod
-
1 x Pre-fixed metal thread in each handle
Installation Guide
Step 1: Set Up You will need:
-
12mm drill bit
-
Handle set and supplied fittings
Step 2: Prepare the Door
Mark the handle positions on the door, ensuring you follow the recommended height and distance from the door edge.
Step 3: Prepare the Handle Fitting
-
Take one handle and screw the threaded rod into the metal insert on the back of the handle.
-
Wind it fully in (without overtightening) and then unwind approximately 5mm to allow space for adjustment.
Step 4: Install the Handle Set
a) Insert the free end of the threaded rod through the pre-drilled hole in the door.
b) On the opposite side, screw the second handle onto the rod and tighten securely.
c) Check the alignment of the handles from both sides.
d) Take a quick photo and share your successful installation with us!
Important Note: For exterior handles, ensure all surfaces—including the rear side—are finished with a high-quality exterior coating to protect against water damage.
-